Metal Building Maintenance

How to Prevent Rust on a Metal Building

Updated 5 min read

How to Prevent Rust on a Metal Building

Modern steel buildings are made to resist rust. Our panels use Sherwin-Williams coated 29-gauge steel, and frames are built from coated steel at our plant in Kilgore, Texas. Still, rust can start anywhere the coating is damaged or water sits for long periods. The good news is that a few easy habits stop almost all of it before it begins.

Why Metal Buildings Rust

Rust needs three things: bare steel, moisture and time. Coatings block the first one. Problems start when a scratch, dent or cut exposes bare metal, or when water, dirt and leaves stay against the steel for weeks. Humidity, coastal air and fertilizer or chemical storage can speed things up.

1. Keep Water Moving Away

Standing water is the number one cause of rust at the base of a building.

  • Grade the ground so water drains away from the base rails.
  • On gravel pads, keep the gravel level and free of low spots.
  • Do not let soil, mulch or firewood pile up against the walls.
  • Choose a vertical roof so rain and debris slide straight off. Read our roof style guide for why.

2. Clean the Building a Couple of Times a Year

Dirt, pollen, bird droppings and leaves hold moisture against the panels. Rinse the roof and walls with a garden hose and use a soft brush with mild soap on stubborn spots. Avoid pressure washers at close range and harsh chemicals that can damage the paint. Our guide to cleaning your carport’s exterior walks through it step by step.

Beige and red metal barn with covered porches
How to Prevent Rust on a Metal Building 2

3. Touch Up Scratches Right Away

Scratches from ladders, mowers, trailers and tools are the most common way rust gets started. When you see bare metal, clean the spot, let it dry and cover it with a matching touch-up paint. Small repairs take minutes and keep a scratch from spreading.

4. Check Fasteners and Trim

Panels are fastened to the frame with screws. Over time, a screw can loosen from vibration or wind. Walk around the building each season and look for loose or missing screws, gaps in trim and any spot where water could get behind a panel. Tighten what is loose, but do not overtighten.

5. Control Condensation Inside

In enclosed buildings, warm moist air hitting cold steel creates condensation that drips and collects. Over time that can lead to rust on the inside. Ventilation, insulation and keeping the doors closed on humid days all help. Our article on stopping condensation in a metal building covers the options.

6. Be Careful With What You Store

Fertilizer, pool chemicals, salt and some feeds give off moisture or corrosive dust. Store them in sealed containers, off the floor and away from the walls. Clean up spills quickly.

7. Watch the Base Rails

The base rails sit closest to the ground and see the most moisture. Keep vegetation trimmed back, keep the area dry and check the anchors at each leg. Our seasonal maintenance checklist includes a quick base and anchor check.

What the Warranty Covers

  • 14-gauge frames: 5-year no-rust warranty.
  • 12-gauge frames: 20-year warranty.
  • Panels: 20-year limited paint warranty from Sherwin-Williams coated steel.

Proper drainage, a level site and basic care help keep that coverage in good standing. See the full details on our warranty page.

Seasonal Rust-Prevention Checklist

  • Spring: rinse off pollen and winter grime, check for scratches.
  • Summer: clear grass and weeds from the base, check drainage after storms.
  • Fall: clear leaves from the roof and around the walls.
  • Winter: watch for condensation inside, keep snow from piling against walls.

Built to Last From Day One

Rust prevention starts with the steel. Choosing a 12-gauge frame, a vertical roof and a well-drained site gives you the best long-term results. If you are planning a new building, call (903) 234-8922 and press 1 for sales, or request a free quote.

Share this article

Ready to Price Your Metal Building?

Get a free, no-obligation quote, or design your building in our free 3D tool and see it from every angle.