Summer Savings ends in
Three Bay Garage
Custom 20′ x 40′ x 12′ metal building built by East Texas Carports, featuring three 10′ x 10′ roll-up doors, a dedicated walk-in entry, and durable tan vertical panel siding with rich brown trim accents. This spacious steel structure delivers ideal storage for multiple vehicles, equipment, or a workshop setup, built to hold up against the elements for years to come. Explore our metal building portfolio to find the perfect custom carport, garage, or barn for your property.
Three Bay Garage
This metal building measures 20 feet wide, 40 feet long, and 12 feet tall at the legs. A vertical roof rises to a center peak and slopes evenly down both sides, capped in a dark brown ridge line and trim that runs the full length of the structure. Tan vertical panels cover the roof and walls, with the same dark brown trim wrapping every corner and edge.
Three white roll-up doors line the gable end, each measuring 10 feet by 10 feet. The doors sit side by side with matching brown trim framing each opening, creating a clean, repeating pattern across the entire front wall. Vertical ribs on each door panel echo the siding above, keeping the whole facade visually connected.
A white walk-in door sits to the right of the roll-up doors, fitted with a black diamond-shaped window at eye level. That door measures 36 inches by 80 inches and offers a separate entry point without needing to raise any of the larger doors.
Two 2′ x 3′ windows sit along the side wall, spaced apart near the front corner of the building. Both windows carry the same dark brown trim as the doors and roofline, tying every opening on the structure into one consistent color scheme.
The roofline extends past the wall on both gable ends, forming a small overhang that shades the top of the roll-up doors and the walk-in door below. That overhang also shelters the wall panels near the roofline from direct rain.
Vertical panel seams run uniformly from the base of the wall to the roof edge, spaced evenly across the entire length of the building. The panels catch light differently along the roof slope compared to the vertical wall sections, creating a subtle contrast between the two surfaces even though both share the same tan tone.
The building sits on a graded dirt and gravel pad, with patches of grass growing in around the edges. A chain-link fence runs along the back of the property, and mature trees rise behind the building on the left side. Large clouds fill much of the sky above the roofline, with breaks of clear blue showing through.
The overall structure keeps a simple rectangular footprint, with no lean-to or side extension attached. Three matching roll-up doors dominate the front elevation, giving the building a wide, garage-style presence despite its straightforward gable shape. The consistent tan and brown color palette carries across every panel, trim piece, and door on the building.
Choosing Your Roof Style
VERTICAL ROOF
Best for Heavy Weather
Best suited for areas with heavy rain, snow, or strong winds. Vertical panels run from the peak to the eaves, allowing for faster drainage and reducing debris buildup — the roof style used on all 9 of our standard garage configurations.
Horizontal Roof (Boxed-Eave or Regular)
Budget-Friendly for Milder Climates
A cost-effective option for regions with milder weather. Panels run side-to-side, offering a sleek look and quick installation — available as a custom option on any garage size.
Built to Code
Steel Framing & Load Compliance
All of our custom metal garages are built with durable 14-gauge or 12-gauge steel framing, providing strong, long-lasting structural support. Every garage is engineered to meet or exceed local building codes, with wind and snow load compliance where applicable.
Each garage is precision-manufactured in the U.S., not assembled from an imported kit — see our Warranty page for full frame and wind-rating terms by gauge.
14 or 12-Gauge Framing
Choose the gauge that matches your wind zone and budget.
Wind & Snow Load Compliance
Engineered where applicable to your local requirements.
Meets or Exceeds Local Codes
Precision-manufactured in the U.S. to code standards.
Garage FAQ
What gauge steel is used for the garage frame?
All garages are built with either 14-gauge or 12-gauge steel framing — 12-gauge offers a higher wind rating and longer frame warranty term; see our Warranty page for exact figures by gauge.
Which roof style should I choose for my garage?
Vertical roofs are best for heavy rain, snow, or wind since they drain faster and resist debris buildup. Horizontal (boxed-eave or regular) roofs are a more budget-friendly, quick-install option for milder climates.
Do you sell pre-fabricated garage kits, or is every garage custom?
Every garage is engineered specifically for your property — we don't sell off-the-shelf kits. The sizes above are common starting points, not fixed options.
Can I add windows or a lean-to to my garage?
Yes — windows, roll-up or walk-in doors, and lean-tos on one or both sides are all available as customization options on any garage size.
Can I finance a garage with no credit check?
Yes — rent-to-own financing is available with both a credit-check option and a no-credit-check option, though the no-credit-check option carries a higher interest rate.
Recently Added Metal Garages
A-Frame Metal Garage
Read Full Article
Two Vehicle Garage
Read Full Article
Three Car Garage
Read Full Article
One Bay Small Garage
Read Full Article
Three Bay Garage
Read Full Article
