One Bay Workshop w/ Lean-To

Custom 30′ x 50′ x 12′ metal building with a 10′ x 50′ lean-to, built by East Texas Carports in East Texas. This fully enclosed steel garage features double 36″ x 80″ walk-in doors, an 8′ x 8′ roll-up door, and durable vertical panel siding designed to withstand years of Texas weather. Explore our metal building portfolio to find the perfect custom carport, garage, or barn for your property.

MANUFACTURER AND INSTALLER
6 TO 8 WEEK LEAD TIME
 FREE DELIVERY & INSTALL
SHERWIN-WILLIAMS COATED PANELS
Workshop
Measurements
30' x 50' x 12'
roof type
Horizontal
vehicle capacity
1
trim color
Black
siding color
Black
roof color
Black
doors
2
windows
2
roll-up doors
1

One Bay Workshop w/ Lean-To

This metal building measures 30 feet wide, 50 feet long, and 12 feet tall at the legs. A 10′ x 50′ x 10′ lean-to runs along one side, adding open, covered space beside the fully enclosed garage. Together, the two sections give this structure a barn-style profile: solid walls on one end, open framing on the other.

The vertical roof rises to a center peak and sheds water quickly off both sides. Dark, vertical steel panels cover the walls from the slab to the roofline. Vertical siding runs water straight down instead of letting it pool, and it gives the exterior a sharp, streamlined look against any backdrop.

An 8′ x 8′ roll-up door sits on the gable end, tall and wide enough for a tractor, ATV, or mid-size vehicle to pull straight through. Two white 36″ x 80″ walk-in doors flank the structure, one near the roll-up door and one on the far end by the lean-to. Small diamond-shaped windows sit in each walk-in door, adding a simple decorative detail against the dark panels.

Two 2′ x 3′ windows sit along the side wall, spaced evenly to bring daylight into the interior. Their placement keeps the wall balanced and gives the garage natural light without relying on the roll-up door for airflow.

The lean-to attaches at the eave and extends the full 50-foot length of the building. Open steel posts support the roofline every few feet, leaving the space underneath completely clear. That open framing shelters anything parked or stored there while keeping the sides fully accessible from any angle.

A poured concrete slab runs under both the enclosed garage and the lean-to. The slab sits level and flush, creating one continuous, finished surface across the whole footprint. Clean concrete edges frame the perimeter, separating the building from the surrounding grass and soil.

The steel frame holds a consistent, boxy shape from corner to corner. Straight roof lines and square corners give the whole structure a tight, engineered look rather than a rounded or arched profile. Every panel runs flush against the next, with no visible gaps or warping along the walls or roof.

Color stays consistent across the entire building, from the roof panels down to the vertical wall siding. The dark tone contrasts sharply against the lighter concrete slab and the surrounding green lawn. That contrast makes the building’s clean lines and sharp edges stand out in the photo.

Overall, the structure reads as a single, purpose-built unit. Full enclosure covers one end for secure storage or workshop space. Open lean-to space covers the other end for anything that needs shelter but not walls. The combination gives the building two distinct functions inside one unified roofline and frame.

Manufacturer, Not a Reseller

We Build It, We Don't Just Sell It

We're not just resellers — we're the manufacturer. That means we oversee quality at every stage, from raw steel to the finished, installed workshop, instead of handing off a kit sourced from a third party. From door locations and window configurations to overall size, framing, and roof design, your workshop is crafted precisely around how you intend to use the space.

Door & Window Placement
Positioned around your workflow, not a fixed template.

Framing & Roof Design
Sized and engineered around your specific space.

Quality Oversight, Start to Finish
We control every stage since we manufacture the building ourselves.

MATERIALS

AG Panel Steel Roofing & Siding

Every workshop's sheet metal panels are crafted from durable agricultural-grade steel and finished with premium Sherwin-Williams® powder coating. These engineered galvanized panels are ribbed for strength and built to Metal Building Manufacturers Association (MBMA) engineering standards.

The same AG panels are used across our agricultural barns, equipment storage, commercial warehouses, and residential garages and carports — one material standard, every building type.

AG PANEL COLOR OPTIONS

Workshop FAQ

Can I buy one of the example workshop models exactly as shown?

Not as a fixed package — the examples above are real project sizes meant to spark ideas. Every workshop is custom-designed to your space, so your final size and layout may differ from these examples.

Are you the actual manufacturer, or a dealer reselling kits?

We're the manufacturer, not a reseller. We oversee quality at every stage of production and installation, rather than sourcing a pre-made kit from a third party.

Can I move the doors and windows to fit my workflow?

Yes — door locations, window configurations, size, framing, and roof design are all customized around how you intend to use the space.

What financing options are available for a workshop?

Both rent-to-own and traditional financing are available. Rent-to-own gives you a choice between a credit-check lender and a no-credit-check lender, though the no-credit-check option carries a higher interest rate.

What material are the workshop panels made from?

Agricultural-grade galvanized steel AG panels, finished with Sherwin-Williams® powder coating and engineered to Metal Building Manufacturers Association (MBMA) standards.