Real garage design
20×25 A-Frame Metal Garage
A garage design we've built for customers. Use it as your starting point: we'll build it to your size and colors at our Kilgore, Texas plant, then deliver and install it free.
Design details
About This Garage
This garage is 20 feet wide, 25 feet long and 10 feet tall, with a Vertical roof style. It is finished in Light Stone on the roof, Light Stone siding and White trim. We can build it at this exact size or change any part of it.
This 20×25 A-frame metal garage is one of our real builds. It is 20 feet wide, 25 feet long and 10 feet tall, with room for one vehicle, one roll-up door and one walk-in door, finished in Light Stone with white trim.
20×25 A-Frame Metal Garage Design
This metal garage measures 20 feet wide, 25 feet long, and 10 feet tall at the legs. An A-frame vertical roof rises to a center peak on a 3/12 pitch, sloping down evenly on both sides. A 6-inch overhang extends past the wall line along the roof edge, capped in white trim that runs the full length of the ridge, eaves, and corners.
Tan vertical panels cover the roof and walls, broken up by thin horizontal striping that runs across each panel in a slightly darker tone. That subtle striping adds texture to the surface without disrupting the overall tan color scheme carried across the entire structure.
A white walk-in door sits on the gable end, set into a white frame and fitted with a black diamond-shaped window at eye level. A metal hasp and lock plate sit just below the window, adding a functional detail to the otherwise clean door surface. The door’s vertical ribbing matches the panel lines on the wall surrounding it.
A wide opening sits to the right of the walk-in door on the same gable end, sized for a 10′ x 10′ roll-up door. No door fills the opening in this photo, leaving the interior framing and a hanging pull cord visible against the dark, shadowed space inside. White trim wraps the full perimeter of this opening, matching the trim used everywhere else on the building.
The roofline extends past both gable ends, forming a visible overhang above the walk-in door and the open roll-up bay. That overhang shades the top of both openings and helps direct rain away from the wall panels just below the roof edge.
Vertical panel seams run evenly from the base of the wall to the roofline, spaced at consistent intervals across the full 25-foot length of the building. The side wall carries the same tan panels and horizontal striping as the front, maintaining one continuous look around every corner of the structure.
The garage sits on a grass lawn, with a paved sidewalk running along one side of the property. A residential structure sits in the background, partially visible past the roll-up opening, along with mature trees framing the edges of the lot. A wide sky filled with layered gray and white clouds stretches across the top of the frame, broken by patches of blue.
Additional angles of the building show the same tan and striped panel design continuing around both remaining sides. One view shows the opposite gable end, where a single white door sits centered on the wall, framed by the same white trim used throughout. Another view shows the long side wall running back from the front corner, with panel seams lining up evenly along its full length and a light-colored house visible in the distance beyond the property line.
Dirt paths worn into the grass lead up to the building from multiple directions, suggesting regular foot traffic around the structure. Patches of bare soil sit closest to the walls, transitioning into fuller grass coverage a few feet out from the foundation.
The overall shape stays a simple rectangle, with no lean-to or side extension attached anywhere on the building. A single walk-in door and one open roll-up bay make up the entire front elevation, while the remaining walls stay fully enclosed on all sides. The tan panels, dark striping, and white trim combine into one consistent color scheme that carries around the entire structure without variation.
Shadows fall across the open roll-up bay, deepening the contrast between the sunlit tan panels outside and the dark, unlit interior visible through the opening. That contrast draws the eye directly to the one unfinished opening on an otherwise fully enclosed and evenly finished structure.
What Comes With This A-Frame Metal Garage
Every garage we sell is built at our own plant in Kilgore, Texas, then delivered and installed free by our own crews anywhere in our service area. Most installs take a single day. We are the manufacturer, not a dealer.
Frames come in 14-gauge steel, rated to 120 mph, or 12-gauge steel, rated to 140 mph. Frames carry a 5-year no-rust warranty on 14-gauge and 20 years on 12-gauge, and the 29-gauge Sherwin-Williams panels carry a 20-year limited paint warranty. See our warranty page for the details, and the color guide to pick your roof, siding and trim.
Build Your Own A-Frame Metal Garage
We can build this A-frame metal garage at the exact same size or change the width, length, height, doors, windows and colors. Compare other sizes in our 20×30 metal garage and 24×30 metal garage guides, or browse all metal garages.
Standard lead time is 6 to 8 weeks after your deposit, and rent-to-own financing is available. Call (903) 234-8922 for a quote.
Get Your Site Ready
Before install day, plan a level spot with room to work around it. Our site prep guide walks through the ground work, and our permit guide covers what your city or county may ask for. In Texas, contact Texas811 at least two working days before any digging, such as for a concrete slab or ground anchors.
Included
Comes With Every Garage
- Built at our Kilgore plantMade at our own plant in Kilgore, Texas. We are the manufacturer, not a dealer.
- Free delivery and installOur own crews deliver and install anywhere in our service area, and most installs take a single day.
- 14- or 12-gauge frame14-gauge frames are rated to 120 mph and 12-gauge frames to 140 mph.
- Frame warranty5-year no-rust warranty on 14-gauge frames, 20 years on 12-gauge.
- Sherwin-Williams panels29-gauge AG panels with a 20-year limited paint warranty.
- 6 to 8 week lead timeStandard lead time after your deposit, with rent-to-own financing available.
See the full warranty for details.
Options
Popular Garage Options
- Roll-up doorsAdd one or more roll-up doors sized to your vehicles.
- Walk-in doors and windowsAdd a walk-in door and windows anywhere they fit your layout.
- Lean-tosAdd a lean-to on one or both sides for covered parking or storage.
- InsulationAdd bubble reflective insulation to the roof, sides and ends.
We serve Texas, Oklahoma, Arkansas, Kansas, Louisiana and Mississippi. See our service area.
Roof styles
Which Roof Style Is Right?
This build has a Vertical roof style. Here is how the three styles compare.
- This build
Vertical roof
Panels run from the peak down to the eave, so rain, snow and debris slide off fastest. It carries the strongest wind rating and is our top pick for most of our service area.
- This build
A-frame (boxed eave) roof
A peaked roof with boxed eaves and horizontal panels for a clean, house-like look at a lower price than vertical.
- This build
Horizontal (regular) roof
Rounded eaves with horizontal panels. It costs the least and works well in milder weather. We do not warranty horizontal roofs on buildings longer than 36 feet.
Make it yours
Change Anything You Want
This is a real build, not a fixed package. Every garage is made to order.
Change the size
Pick the width, length and height you need in our free 3D designer, and see the price as you build.
Open the 3D designerPick your colors
Choose from 20 Sherwin-Williams colors for your roof, siding and trim.
See the color guidePay over time
Rent-to-own starts with 20% down, with credit-check and no-credit-check options.
See financing
Customer reviews
Metal Building Reviews From Real Customers
Ready to See Your Price?
Get a free, no-obligation quote today. Sales: ext. 1 · Scheduling: ext. 2
