Two Vehicle Garage

This metal garage measures 24 feet wide, 30 feet long, and 10 feet tall at the legs. A horizontal roof style caps the structure, running panels side to side across the slope rather than up and down. That roof rises to a center peak and slopes down evenly on both sides, finished in a dark brown tone that matches the upper walls below it.

Dark brown horizontal panels cover the roof and the upper portion of the walls, running in long, even bands from one end of the building to the other. A lighter copper-tan trim wraps every corner post and frames each door opening, creating a sharp two-tone contrast against the darker panels surrounding it. That trim color repeats consistently across every edge of the structure, from the roofline down to the base of each corner post.

Two white roll-up doors sit side by side on the gable end, each measuring 10 feet by 8 feet. Both doors sit framed in the same copper-tan trim used on the corner posts, with a narrow strip of matching trim running down the wall between the two openings. Horizontal ribbing on each door mirrors the horizontal panel lines above, keeping the whole facade visually consistent from the roof down to ground level.

The trim around each door frame extends outward slightly from the wall surface, creating a subtle three-dimensional edge around both openings. That raised trim catches light differently than the flat panels beside it, adding a bit of texture to what would otherwise be a flat, uniform wall.

The roofline extends past the wall on the gable end, forming a visible overhang above both roll-up doors. That overhang runs the width of the building and helps keep rain off the door tracks and the wall surface just below the roofline.

A side wall runs back along the full 30-foot length of the building, covered in the same dark brown horizontal panels used on the front. A white door sits partway down this side wall, offering a secondary entry point separate from the two roll-up doors on the front. Greenery and low shrubs grow up against the base of this side wall, softening the transition between the structure and the ground.

Horizontal seams run evenly across every wall panel, spaced at consistent intervals from the base of the building to the roofline. Those seams continue in a straight, unbroken line around the corner from the front wall to the side wall, showing a clean, well-aligned installation across the entire structure.

The garage sits on a bare dirt and gravel pad, with no concrete slab visible in this shot. Scattered rocks and patches of loose soil surround the base of the building, transitioning into open, undeveloped land beyond the immediate footprint. A wide, open sky fills most of the background, layered with soft gray and white clouds that stretch from one edge of the frame to the other.

The overall shape stays a straightforward rectangle, with no lean-to or additional roofline attached anywhere on the structure. Two matching roll-up doors dominate the front elevation, while a single side door provides separate access along the length of the building. The dark brown and copper-tan color combination carries consistently across the roof, walls, corner trim, and door frames, giving the garage a warm, coordinated finish from every visible angle.

Shadows fall gently across the front wall beneath the roof overhang, marking the transition between the shaded upper trim and the sunlit lower portion of the doors. That contrast, combined with the horizontal panel lines running the full length of the building, gives the structure a long, low, and grounded appearance despite its full 10-foot leg height.